
Product Overview
The MSPM0G1107TRGZR is a high-performance, ultra-low-power 32-bit microcontroller from Texas Instruments' MSPM0 G-Series family. Based on an enhanced Arm Cortex-M0+ processor core operating at up to 80 MHz, the device combines high processing performance, advanced analog peripherals, flexible communication interfaces, intelligent timers, extensive DMA resources, and low-power operation.
The MSPM0G1107TRGZR integrates 128 KB of Flash memory with ECC and 32 KB of SRAM with hardware parity, together with two simultaneous-sampling 12-bit ADCs capable of up to 4 Msps, a general-purpose operational amplifier, configurable internal voltage reference, and an integrated temperature sensor.
The device also provides 7-channel DMA, up to 22 PWM channels, four UART interfaces, two I²C interfaces, two SPI interfaces, RTC functionality, windowed watchdog timers, and extensive GPIO capabilities.
With its combination of high-speed processing, advanced analog integration, flexible connectivity, low-power modes, and extended temperature operation, the MSPM0G1107TRGZR is suitable for industrial automation, motor control, smart metering, power systems, communication modules, consumer electronics, medical equipment, and embedded control applications.
Key Features
-
Arm Cortex-M0+ 32-bit RISC processor core
-
CPU frequency up to 80 MHz
-
Memory Protection Unit
-
128 KB embedded Flash memory
-
Flash ECC support
-
32 KB SRAM
-
Hardware SRAM parity
-
2 × 12-bit ADCs
-
ADC conversion rate up to 4 Msps
-
Up to 17 external ADC channels at family level
-
Hardware ADC averaging
-
Up to 14-bit effective resolution at 250 ksps with averaging
-
1 × general-purpose operational amplifier
-
Configurable 1.4 V or 2.5 V internal voltage reference
-
Integrated temperature sensor
-
7-channel DMA controller
-
Up to 22 PWM channels
-
Advanced-control timers with dead-band insertion
-
Complementary PWM outputs
-
QEI support
-
32-bit general-purpose timer
-
2 × windowed watchdog timers
-
RTC with alarm and calendar
-
4 × UART interfaces
-
LIN, IrDA, DALI, Smart Card and Manchester support
-
3 low-power UART interfaces
-
2 × I²C interfaces
-
I²C Fast-mode Plus up to 1 Mbit/s
-
SMBus and PMBus support
-
2 × SPI interfaces
-
SPI speed up to 32 Mbit/s on one interface
-
CRC-16 and CRC-32
-
Up to 60 GPIOs at family level
-
5 V-tolerant open-drain I/O support
-
High-drive I/O
-
High-speed I/O
-
2-pin SWD debugging
-
Multiple low-power operating modes
-
Operating temperature range from -40°C to +105°C
-
VQFN-48 package
-
0.5 mm package pitch
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | Texas Instruments |
| Part Number | MSPM0G1107TRGZR |
| Product Family | MSPM0 |
| Series | MSPM0G1107 |
| Category | Microcontrollers |
| Subcategory | ARM Cortex-M MCU |
| Core Processor | Arm Cortex-M0+ |
| Core Size | 32-Bit |
| Maximum CPU Speed | 80 MHz |
| Program Memory | 128 KB Flash |
| Flash ECC | Yes |
| SRAM | 32 KB |
| SRAM Parity | Yes |
| ADC | 2 × 12-Bit SAR ADC |
| ADC Speed | Up to 4 Msps |
| ADC Channels | Up to 17 External at Family Level |
| Operational Amplifier | 1 × GPAMP |
| DMA | 7-Channel |
| PWM | Up to 22 Channels |
| UART | 4 |
| I²C | 2 |
| SPI | 2 |
| Maximum SPI Speed | Up to 32 Mbit/s |
| Maximum I²C Speed | Up to 1 Mbit/s |
| RTC | Yes |
| Watchdog | 2 × Windowed Watchdog |
| CRC | CRC-16 / CRC-32 |
| GPIO | Up to 60 at Family Level |
| Debug Interface | 2-Pin SWD |
| Supply Voltage | 1.62 V – 3.6 V |
| Operating Temperature | -40°C to +105°C |
| Package | VQFN-48 |
| Package Code | RGZ |
| Package Size | 7 mm × 7 mm |
| Number of Pins | 48 |
| Package Pitch | 0.5 mm |
| Mounting Type | Surface Mount |
| Packaging | Large Tape & Reel |
| Lifecycle Status | Active |
TI specifies the MSPM0G1107 as an 80 MHz Arm Cortex-M0+ MCU with 128 KB Flash, 32 KB SRAM, two 12-bit 4 Msps ADCs and one general-purpose amplifier. The specific MSPM0G1107TRGZR ordering code corresponds to the 48-pin VQFN (RGZ) package.
Processor & Architecture
The MSPM0G1107TRGZR uses an enhanced Arm Cortex-M0+ 32-bit processor core operating at up to 80 MHz.
The processor architecture is optimized for high performance and low power while providing sufficient computational resources for real-time control, sensing, communication, and embedded signal-processing applications.
Key processor capabilities include:
-
Arm Cortex-M0+ architecture
-
Up to 80 MHz operating frequency
-
Memory Protection Unit
-
Efficient interrupt handling
-
Low-power operation
-
2-pin SWD debugging
Memory & Storage
The MSPM0G1107TRGZR provides:
-
128 KB embedded Flash
-
32 KB SRAM
-
Flash ECC
-
SRAM hardware parity
-
Memory protection
-
Reliable data storage and firmware execution
The integrated ECC and SRAM parity functions improve data integrity and system reliability in industrial and embedded applications.
Advanced Analog Peripherals
The MSPM0G1107 integrates two high-performance, simultaneous-sampling 12-bit ADCs.
ADC features include:
-
2 × 12-bit ADCs
-
Up to 4 Msps conversion rate
-
Up to 17 external channels at family level
-
Hardware averaging
-
Up to 14-bit effective resolution at 250 ksps with hardware averaging
-
Configurable internal voltage reference
-
Integrated temperature sensor
The device also integrates a general-purpose operational amplifier, making it suitable for signal-conditioning and analog control applications.
These analog resources can be used for:
-
Current sensing
-
Voltage monitoring
-
Temperature measurement
-
Battery monitoring
-
Industrial sensors
-
Motor-control feedback
-
Power conversion
-
Data acquisition
Timer & PWM Resources
The MSPM0G1107TRGZR provides extensive timer and PWM resources.
Features include:
-
Two 16-bit advanced-control timers
-
Dead-band insertion
-
Fault handling
-
Complementary PWM outputs
-
Up to 22 PWM channels across the device family
-
16-bit general-purpose timers
-
32-bit general-purpose timer
-
QEI support
-
Low-power timer operation
-
Two windowed watchdog timers
-
RTC with alarm and calendar
These timer resources make the MCU particularly suitable for:
-
Motor control
-
BLDC motor applications
-
Power supplies
-
Inverters
-
LED control
-
Actuator control
-
Industrial automation
Communication & Connectivity
The MSPM0G1107 family provides multiple communication interfaces:
-
4 × UART
-
2 × I²C
-
2 × SPI
One UART supports additional communication protocols including:
-
LIN
-
IrDA
-
DALI
-
Smart Card
-
Manchester coding
The I²C interfaces support Fast-mode Plus up to 1 Mbit/s, as well as SMBus and PMBus features. One SPI interface can operate at up to 32 Mbit/s.
These interfaces can connect:
-
Sensors
-
Displays
-
External memory
-
Wireless modules
-
Motor drivers
-
Power-management ICs
-
Industrial communication devices
-
Other microcontrollers
DMA & Data Processing
The MSPM0G1107TRGZR integrates a 7-channel DMA controller.
DMA enables efficient data transfers between memory and peripherals while reducing CPU intervention. This is useful for:
-
ADC data acquisition
-
UART communication
-
SPI transfers
-
Sensor data processing
-
Real-time control
-
High-speed peripheral communication
The device also provides CRC-16 and CRC-32 hardware for data-integrity checking.
Clock System
The MSPM0G1107 provides a flexible clock architecture.
Clock resources include:
-
Internal 4 MHz to 32 MHz system oscillator
-
PLL supporting operation up to 80 MHz
-
Internal 32 kHz oscillator
-
External high-frequency crystal oscillator
-
External 32 kHz crystal oscillator
-
External clock input
The flexible clock system allows designers to optimize processing performance and power consumption according to application requirements.
Low-Power Operation
The MSPM0G1107TRGZR is designed for low-power embedded applications.
Available power modes include:
-
RUN
-
SLEEP
-
STOP
-
STANDBY
-
SHUTDOWN
TI specifies typical power characteristics including approximately 1.5 µA in STANDBY under specified conditions and approximately 80 nA in SHUTDOWN with I/O retention and I/O wake-up capability.
These characteristics make the device suitable for battery-powered and energy-sensitive systems.
Security & Data Integrity
The MSPM0G1107TRGZR includes hardware features designed to improve system reliability and data integrity.
Features include:
-
Memory Protection Unit
-
Flash ECC
-
SRAM parity
-
CRC-16
-
CRC-32
-
Secure debug support
-
Watchdog timers
-
Brownout and power monitoring functions
The CRC hardware can be used to verify firmware and communication data integrity.
Development & Debugging
The MSPM0G1107TRGZR supports 2-pin Serial Wire Debug (SWD) for programming and debugging.
Development support includes:
-
SWD debugging
-
MSPM0 Software Development Kit
-
Code Composer Studio
-
TI Resource Explorer
-
MSPM0 LaunchPad development ecosystem
-
TI reference designs
-
Firmware examples
-
Development and training resources
TI provides an extensive software and hardware ecosystem for MSPM0 development.
Applications
The MSPM0G1107TRGZR is suitable for a wide range of applications, including:
-
Factory Automation
-
Industrial Control
-
Industrial Transport
-
Grid Infrastructure
-
Smart Metering
-
Communication Modules
-
Lighting
-
Motor Control
-
Home Appliances
-
Uninterruptible Power Supplies
-
Inverters
-
Electronic Point of Sale Systems
-
Medical and Healthcare Equipment
-
Test and Measurement
-
Battery-Powered Devices
-
IoT Devices
-
Embedded Control Systems
TI specifically lists factory automation and control, industrial transport, grid infrastructure, smart metering, communication modules, lighting, motor control, home appliances, UPS/inverters, medical and healthcare, and test and measurement among the applications for the MSPM0G110x family.
Benefits
The MSPM0G1107TRGZR combines an 80 MHz Arm Cortex-M0+ processor, 128 KB Flash, 32 KB SRAM, dual high-speed 12-bit ADCs, an integrated operational amplifier, extensive timer/PWM resources, DMA, UART, I²C, and SPI connectivity.
Its advanced analog peripherals and timer architecture make it particularly useful for motor-control, power-conversion, sensing, and industrial-control applications.
The combination of low-power modes, wide supply-voltage range, extended temperature operation, and compact VQFN packaging provides flexibility for both industrial and consumer embedded designs.
Packaging & Ordering Information
| Parameter | Details |
|---|---|
| Manufacturer | Texas Instruments |
| Part Number | MSPM0G1107TRGZR |
| Product Family | MSPM0 |
| Series | MSPM0G1107 |
| Core | Arm Cortex-M0+ |
| Maximum Frequency | 80 MHz |
| Flash Memory | 128 KB |
| SRAM | 32 KB |
| Flash ECC | Yes |
| SRAM Parity | Yes |
| ADC | 2 × 12-Bit |
| ADC Speed | Up to 4 Msps |
| Operational Amplifier | 1 |
| DMA | 7-Channel |
| PWM | Up to 22 Channels |
| UART | 4 |
| I²C | 2 |
| SPI | 2 |
| Maximum SPI Speed | Up to 32 Mbit/s |
| Maximum I²C Speed | Up to 1 Mbit/s |
| RTC | Yes |
| Watchdog | 2 × Windowed |
| CRC | CRC-16 / CRC-32 |
| Debug | SWD |
| Package | VQFN-48 |
| Package Code | RGZ |
| Package Size | 7 mm × 7 mm |
| Number of Pins | 48 |
| Package Pitch | 0.5 mm |
| Mounting Type | Surface Mount |
| Operating Temperature | -40°C to +105°C |
| Supply Voltage | 1.62 V – 3.6 V |
| Packaging | Large Tape & Reel |
| Lifecycle | Active |
Datasheet
For complete electrical characteristics, pin configuration, memory architecture, ADC specifications, timer configuration, communication interfaces, absolute maximum ratings, and application information, please refer to the official Texas Instruments documentation.
Datasheet: Official MSPM0G1107 Datasheet
Frequently Asked Questions
What is MSPM0G1107TRGZR?
The MSPM0G1107TRGZR is a 32-bit low-power microcontroller manufactured by Texas Instruments and belonging to the MSPM0 G-Series family.
What processor core does MSPM0G1107TRGZR use?
The device uses an Arm Cortex-M0+ processor core operating at up to 80 MHz.
How much Flash memory does MSPM0G1107TRGZR have?
The device provides 128 KB of embedded Flash memory with ECC.
How much RAM does MSPM0G1107TRGZR have?
The device provides 32 KB of SRAM with hardware parity.
Does MSPM0G1107TRGZR have ADCs?
Yes. It integrates two simultaneous-sampling 12-bit ADCs with conversion rates up to 4 Msps.
Does MSPM0G1107TRGZR have an operational amplifier?
Yes. The MSPM0G1107 integrates one general-purpose operational amplifier.
How many communication interfaces does MSPM0G1107TRGZR support?
The device family provides 4 UART interfaces, 2 I²C interfaces, and 2 SPI interfaces.
Does MSPM0G1107TRGZR support PWM?
Yes. The MSPM0G1107 family supports up to 22 PWM channels, including advanced-control timers with dead-band insertion and complementary outputs.
What package is used for MSPM0G1107TRGZR?
The MSPM0G1107TRGZR is supplied in a 48-pin VQFN package with the RGZ package code, measuring approximately 7 mm × 7 mm.
What is the operating voltage of MSPM0G1107TRGZR?
The specified supply-voltage range is 1.62 V to 3.6 V.
What is the operating temperature of MSPM0G1107TRGZR?
The operating temperature range is -40°C to +105°C.
Is MSPM0G1107TRGZR an active product?
Yes. Texas Instruments currently lists MSPM0G1107TRGZR as ACTIVE.
Is MSPM0G1107TRGZR suitable for motor control?
Yes. The MSPM0G1107 provides advanced-control timers, complementary PWM outputs, ADCs, operational amplifier resources, DMA, and QEI support, making it suitable for motor-control applications.
What applications is MSPM0G1107TRGZR suitable for?
It is suitable for factory automation, industrial control, smart metering, grid infrastructure, motor control, lighting, home appliances, UPS/inverters, communication modules, medical equipment, and test-and-measurement applications.
Can I request bulk pricing for MSPM0G1107TRGZR?
Yes. Contact our sales team with your required quantity and delivery destination to request current pricing, stock availability, MOQ, lead time, and shipping options.
Why Choose Us
-
100% Original and Authentic Components
-
Competitive Wholesale Pricing
-
Global Shipping Available
-
Reliable Supply Chain
-
Professional Technical Support
-
Bulk and OEM Order Support
-
Long-Term Supply Support
Request a Quote
Looking for MSPM0G1107TRGZR pricing, stock availability, or bulk purchasing options?
Contact our sales team for:
-
Bulk Order Quotations
-
Current Stock Availability
-
MOQ and Lead Time
-
Worldwide Shipping Options
-
Alternative Part Recommendations
-
Datasheet and Technical Documentation
Request a Quote for MSPM0G1107TRGZR
Payment Methods
We accept:
-
T/T (Bank Wire Transfer)
-
PayPal
-
Credit Card
Shipping Options
We support international shipping through available logistics providers, including:
-
DHL
-
FedEx
-
UPS
-
Registered Airmail
-
Other Available Shipping Methods
Shipping time may vary depending on destination, customs clearance, product availability, and carrier conditions.
Wholesale & OEM Support
We provide sourcing and supply support for:
-
Bulk Purchases
-
OEM Projects
-
EMS Manufacturers
-
Distributors
-
Engineering Projects
-
Long-Term Supply Programs
Contact us with your required quantity and delivery destination for a customized quotation.